| Fluid | Mineral or synthetic compatible with the following seals: NBR, FKM, FPM, Nylon |
||||
| Kinematic viscosity suggested |
Average ambient temp. (ēC) | < -10 | -10÷10 | 10÷35 | > 35 |
| VG (cSt = mm²/s) | 22 | 32 | 46 | 68 | |
| Optimale kinematic viscosity | VG= 10 cSt ÷ 100 cSt | ||||
| Max kinematic viscosity suggested at the start-up | VG= 750 cSt | ||||
| Viscosity index suggested | VI > 100 | ||||
| Oil filtering | > 200 bar: 10 µm < 200 bar: 25 µm |
||||
| Inlet pressure | -0,3 ÷ 2 bar | ||||
| Pump rotation | Unidirectional (Right or left) | ||||
| Pump type | Rotation | IN 1 IN 2 ISO 228 |
OUT 1 OUT 2 ISO 228 |
A ISO 228 |
B ISO 228 |
Weight Kg |
|
| Right | Left | ||||||
| NPGH-63 | 105-012-10636 | 105-012-10645 | G 1 | G 3/4 | 201.5 | 136.5 | 19 |
| NPGH-73 | 105-012-10734 | 105-012-10743 | 205.5 | 140.5 | 21 | ||
| NPGH-84 | 105-012-10841 | 105-012-10850 | G 1 1/4 | G 1 | 209.5 | 141 | 21.5 |
| NPGH-100 | 105-012-11000 | 105-012-11019 | 215.5 | 144.5 | 22 | ||
| NPGH-116 | 105-012-11162 | 105-012-11171 | 221.5 | 150.5 | 22.5 | ||
| NPGH-133 | 105-012-11331 | 105-012-11340 | G 1 1/2 | 231.5 | 152.5 | 23.5 | |
| NPGH-150 | 105-012-11500 | 105-012-11519 | 236.5 | 157.5 | 24 | ||
| Pump type | Displacement cm3/rev |
Pressure | Max. continuous speed rpm |
Max. intermittent speed rpm |
Min. speed rpm |
||
| P1 bar |
P2 bar |
P3 bar |
|||||
| NPGH-63 | 63.70 | 290 | 315 | 325 | 1800 | 2700 | 300 |
| NPGH-73 | 74.87 | 280 | 300 | 315 | |||
| NPGH-84 | 85.96 | 260 | 280 | 290 | |||
| NPGH-100 | 102.60 | 250 | 270 | 280 | |||
| NPGH-116 | 119.24 | 240 | 260 | 270 | 1500 | ||
| NPGH-133 | 135.88 | 220 | 250 | 260 | 2500 | ||
| NPGH-150 | 149.75 | 180 | 210 | 220 | |||
P1 = Max. continuous pressure (100%)
P2 = Max. Intermittent pressure (20 sec.max.)
P3 = Max. peak pressure (6 sec.max)
| Anti-clockwise rotation, left pump | Clockwise rotation, right pump |
 |
 |