| Fluid | Mineral or synthetic compatible with the following seals: NBR, FKM, FPM, Nylon |
||||
| Kinematic viscosity suggested |
Average ambient temp. (ēC) | < -10 | -10÷10 | 10÷35 | > 35 |
| VG (cSt = mm²/s) | 22 | 32 | 46 | 68 | |
| Optimale kinematic viscosity | VG= 10 cSt ÷ 100 cSt | ||||
| Max kinematic viscosity suggested at the start-up | VG= 750 cSt | ||||
| Viscosity index suggested | VI > 100 | ||||
| Oil filtering | > 200 bar: 10 µm < 200 bar: 25 µm |
||||
| Inlet pressure | -0,3 ÷ 2 bar | ||||
| Pump rotation | Unidirectional (Right or left) | ||||
| Pump type | Rotation | IN 1 IN 2 ISO 228 |
OUT 1 OUT 2 ISO 228 |
A ISO 228 |
B ISO 228 |
Weight Kg |
|
| Right | Left | ||||||
| NPGH-63 | 105-012-00638 | 105-012-10647 | G 1 | G 3/4 | 186 | 121 | 17.5 |
| NPGH-73 | 105-012-00736 | 105-012-00745 | 190 | 125 | 18.5 | ||
| NPGH-84 | 105-012-10843 | 105-012-00852 | G 1 1/4 | G 1 | 194 | 125.5 | 19 |
| NPGH-100 | 105-012-01002 | 105-012-01011 | 200 | 129 | 19.5 | ||
| NPGH-116 | 105-012-01164 | 105-012-01173 | 206 | 135 | 20 | ||
| NPGH-133 | 105-012-11333 | 105-012-11342 | G 1 1/2 | 216 | 137 | 21 | |
| NPGH-150 | 105-012-01502 | 105-012-01511 | 221 | 142 | 21.5 | ||
| Pump type | Displacement cm3/rev |
Pressure | Max. continuous speed rpm |
Max. intermittent speed rpm |
Min. speed rpm |
||
| P1 bar |
P2 bar |
P3 bar |
|||||
| NPGH-63 | 63.70 | 290 | 315 | 325 | 1800 | 2700 | 300 |
| NPGH-73 | 74.87 | 280 | 300 | 315 | |||
| NPGH-84 | 85.96 | 260 | 280 | 290 | |||
| NPGH-100 | 102.60 | 250 | 270 | 280 | |||
| NPGH-116 | 119.24 | 240 | 260 | 270 | 1500 | ||
| NPGH-133 | 135.88 | 220 | 250 | 260 | 2500 | ||
| NPGH-150 | 149.75 | 180 | 210 | 220 | |||
P1 = Max. continuous pressure (100%)
P2 = Max. Intermittent pressure (20 sec.max.)
P3 = Max. peak pressure (6 sec.max)
| Anti-clockwise rotation, left pump | Clockwise rotation, right pump |
 |
 |